3-Phase AC Current Sensor Transducer Transformer Transmitter with 3 Element 0-400A AC Output 4-20mA DC

Three-phase Current transducer combines a current transformer and signal conditioner, and is suitable for use in industrial automation systems. The transducer provides average root-mean-square (RMS) measurement for distorted alternating current waveforms, with an accuracy of 0.5% full scale (FS) and a response time of 250 ms (10-90% step change). Signal output is 0-5 volts direct current (VDC). Three core elements allow for measurement of three-phase power loads. It is suitable for monitoring variable-frequency drive (VFD) and silicone control rectifier (SCR) alternating current (AC) loads and other ¡°noisy¡± three-phase loads that produce distorted waveforms. Current transducers are used to detect electrical current flowing in a wire or cable, and to generate an electrical signal proportional to the current for measurement or control. The transducer consists of an electrical winding, a magnetic core, and a signal conditioner. When current flows through a wire, the transducer winding generates a current, which produces a magnetic field in the core, which then creates a proportional current or voltage output signal. Current transducers are used in industrial automation systems for monitoring, alarming, and equipment control. Warranty & Return 1.24 MONTHS QUALITY guarantee. Warranty : In the process of Exchanging products Buyer shoud bear freight of return shipping, while Manufactuer should bear freight of sending. 2.Buyer can return products and get FULL REFUND of item value within 30 days after receiving , if there's any quality problem in original products; Freight of return should be beard by manufacturer.

• Input:0-400A AC(3 elements)
• Offset Voltage: =/<10mV
• Capacity Max:0-400A AC (is_Customerized,e.g.Input:0-280A with Output 0-20mA DC)
• Working Environment:-10 to +70 degrees Centigrade,20%-90% without condensation
• Storage Environment:-25 to +85 degress Centigrade,20%-95% without condensation
• Output:4-20mA DC(3 elements)
• Power Supply:24V DC +/-15%(if you need 15V or 12V,contact us)
• Hole Diameter:20mm
• Dimension:120*50*56.5mm (L*W*H)
• Accurracy: 0.5%
• Response Time:250mS
• Load Capacity: 30 times current continuous
• Isolation Withstanding Voltage:AC 3.0KV/min